SuperATV
Honda Talon 1000R SuperATV 6" Portal Gear Lift
- MPN:
- PGH6-3-83
- Availability:
- Usually ships same day or the following
- Shipping:
- Free Shipping
Description
Gen 3 Portals Are Geared for All
Everyone knows there’s no such thing as a “one size fits all” off-road experience. It all comes down to where, when, and how you like to ride. That’s why SuperATV’s Gen 3 portals are all about giving you options. When you buy this 6” Portal Gear Lift for your Honda Talon 1000R, you get a say in what kind of housings are used (cast or billet aluminum) and how much gear reduction you get. If you’re the kind of rider who likes to push your machine to its limits in terms of power and tire size, a 45% gear reduction is right up your alley. If you’re looking to increase your cornering abilities on the trail, go with a 30% gear reduction. Either way, you can’t go wrong.
GDP—the Most Trusted Name in Portals
When you add a set of GDP portals to your machine, you’re joining thousands of other riders who experience the strength and reliability of this product every time they get behind the wheel. More side-by-side enthusiasts turn to SuperATV for portals over any other brand, and there’s a reason for that. GDP portals are the most trusted, tested, and proven, hands down.
Perfect for Mud
Mud and portals go together like peanut butter and jelly. With GDP portals, your 1000R has the room for bigger tires and the torque boost needed to run them. You’ll be able to cut through the thickest, sloppiest mud with ease, and the 6” lift will keep you from getting swamped. You’ll never approach mud the same way again.
A Gear Reduction That Protects Your Drivetrain
By putting the gear reduction in the hub, GDP portals don’t put any extra stress on your machine’s drivetrain. This means your axles, differential, prop shaft, and transmission are able to do their job without acquiring any premature wear and tear. Being able to ride without worry lets you focus on what’s really important—having fun.
Unmatched Gear Material
Your portals are only as strong as the gears inside of them, so SuperATV made theirs as smart and strong as humanly possible. These top-of-the-line gears are made using 9310 alloy steel, which is insanely strong. SuperATV also precision grind them to ensure that they mate perfectly with every revolution. Long story short, these gears deliver a super smooth and quiet performance, no matter how you ride.
Stronger Housings by Design
SuperATV went all out when designing their portal housings, because they know how important it is for them to be stronger, smarter, and more reliable than anything else out there. And what’s more, you get options—choose from cast or USA-made, CNC-machined 6061 billet aluminum. Whichever you choose, you’re getting housings that are second to none.
- GDP housings are reinforced in all the right places
- They’re built with better oil flow and gearing forces in mind
- There are no gimmicks and no vents because vents do more harm than good—we know because we tested them
The Strongest Portal Backing Plates You Can Get
Portal backing plates are made using an advanced steel alloy that’s specialized for ultra-high force applications, so you know it’s tough enough to put up with your level of trail abuse. At 5/16” thick and with a metal that’s even stronger than chromoly, these backing plates are guaranteed to perform for years on end.
Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:
- Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
- A sealed input gear and double-lipped output seal
- 100% sealing coverage throughout so you can forget about oil leaks
Bearings That Rock
You’ll never have to worry about your bearings failing after installing GDP portals on your machine. Roller bearings are used to hold the idler gear because we understand the value of ultra-strong parts. The output bearing is a double-angular contact bearing that can handle huge loads in any direction without showing wear. What does all of this mean for you? It means you’re getting bearings that are built for battle and made to last.
Universal Hubs and Slotted Rotors
GDP portals come with precision-ground, stainless steel slotted rotors that stay cool and give you the braking power you need, when you need it. Our portals also come with universal hubs that have 4/156, 4/137, 4/115, and 4/110 bolt patterns and lugs. This means you’ll be able to run nearly any side-by-side wheel under the sun! We also invented the tapered output shaft that attaches to the hubs. It gives you a more secure lock that keeps your hubs from wobbling or wearing over time.
Features:
- Available with billet or cast aluminum housings
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- 1.5 in. diameter 4340 hardened steel driveshaft
- Housings use Thermo-Tork® gaskets that don’t let anything through
- Universal hub fits all major bolt patterns
- Gear reduction reduces stress on your drivetrain
- Weighs 224 lb. total, which is 25+ lb. lighter than the competition
Wheel Requirements:
- 18” or larger wheel required
- 18” wheels cannot exceed 4-1/2” backspacing
- 20” and larger wheels cannot exceed 5” backspacing
Applications:
Honda Talon 1000R : 2019-2021
Other Portal Options:
Honda Talon 1000R SuperATV 4" Portal Gear Lift
Honda Talon 1000R SuperATV 8" Portal Gear Lift
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.