Name: Polaris Sportsman 550/850/1000 8" Portals - SuperATV GDP
Brand: SuperATV
Price: 3899.95 USD
Availability: InStock

Description
Warranty Information

Description

Experience a new level of off-road capability and versatility with SuperATV 8" GDP Portals for your Polaris Sportsman—designed to elevate your adventures and overcome the challenges of rugged terrain.

Maximize Performance with GDP Portals
You want your machine to perform at its best. With Polaris Sportsman GDP Portals, that’s possible. SuperATV is the only company that offers portals for your Sportsman. With an all-in-one 45% reduction and 8” lift, you’re getting the ability to run bigger tires and take on any terrain. Upgrade from cast to billet aluminum for optimal strength.

Dominate Any Terrain
Conquer any terrain confidently with GDP Portals for your Polaris Sportsman. They give you the clearance to run massive tires. With a 45% gear reduction, you’re getting ultimate torque—you’ll be able to turn the biggest tires as if they were stock size.

Keep the Strain on Your Drivetrain to a Minimum
GDP Portals put the gear reduction in the wheel hub instead of in the transmission. Having it in the wheel hub gives your axles, prop shaft, differential, and transmission better protection. You’re getting more power without wearing down your drivetrain.

Optimal Durability
You need portals that are built to withstand anything so you can ride rough with confidence. GDP Portals come in a cast or billet aluminum housing. That and 5/16” backing plates made of advanced steel alloy make these portals the best in the game!

Reinforced housings for gear retention and optimized for oil flow
Advanced steel alloy backing plates are stronger than chromoly
Enhance with Portal Blood—gear oil formulated for GDP Portals
There are no gimmicks and no vents because vents do more harm than good

Advanced Gaskets, Seals, and Bearings

Advanced gaskets and O-rings with excellent oil resistance and low deterioration rates
A sealed input gear and double-lipped output seal
100% sealing coverage throughout so you can forget about oil leaks
Double-angular contact output bearings to prevent premature wear
Roller idler and drive bearings to maintain perfect gear meshing

Polaris Sportsman 8” Portal Gear Lift Includes:

(4) Assembled portal hubs complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
(4) Universal hubs and stainless steel slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates
(2) Steering arms
Extended brake lines
All required hardware, including recessed castle nut socket

Click Here for Installation Instructions

Wheel Requirements:

22” or larger wheel required
Wheels cannot exceed 5” backspacing
Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer

Applications:

Polaris Sportsman 550 : 2010-2014
Polaris Sportsman Forest 550 : 2011-2014
Polaris Sportsman 550 Touring EPS : 2010-2014
Polaris Sportsman X2 550 : 2010-2014
Polaris Sportsman XP 550 : 2009-2014
Polaris Sportsman 850 : 2016+
Polaris Sportsman Forest 850 : 2011-2015
Polaris Sportsman 850 MV : 2012-2014
Polaris Sportsman 850 SP : 2015+
Polaris Sportsman 850 Touring : 2015+
Polaris Sportsman 850 Touring EPS : 2010-2014
Polaris Sportsman 850 Touring SP : 2015-2016
Polaris Sportsman XP 850 : 2009+
Polaris Sportsman X2 850 : 2011
Polaris Sportsman XP 850 High Lifter Edition : 2016+
Polaris Sportsman Forest 1000 : 2015
Polaris Sportsman 1000 Touring : 2015+
Polaris Sportsman XP 1000 : 2015+
Polaris Sportsman XP 1000 High Lifter Edition : 2016+

Still need help deciding?
Contact us and we'll be glad to assist you with any questions or help you may need.

Patent # 11,299,042

Patent # 11,318,787

WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.

⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Save

View AllClose

Warranty Information

Limited Lifetime Warranty When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty. SuperATV extends the following limited lifetime warranty. This limited warranty extends only to the original purchaser. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE. Procedures for obtaining warranty service: Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives. If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA. Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge. Replacement bearings, seals and gaskets can be found at www.SuperATV.com. Thank you for your business!

View AllClose